Grappler+
Apple Printer Interface Card for Apple II IIe
and IIgs
A Grappler+ Printer Interface by OrangeMicro
for the Apple II, IIe, or IIgs, card is not tested
- no guarantee (seems unused, no scratches). The
cable you need to connect a Printer to your Apple
is the very common "Centronics cable".
It is sold by several Apple II vendors. The pin-out
is shown below:
Grappler+ Pin Assignments
~~~~~~~~~~~~~~~~~~~~~~~~~
STB 1
D0 3
D1 5
D2 7
D3 9
D4 11
D5 13
D6 15
D7 17
ACK 19
BUSY 21
P.E. 23
SLCT 25
N/C -
GND all others
What are the DIP switches on my Grappler+ for?
The DIP switches are used to configure your
card for a series of different printers out
there. I'll list those settings:
DIP switch settings:
~~~~~~~~~~~~~~~~~~~
DIP SWITCH POSITIONS 1 2 3 4
Epson Series and Star Gemini OFF ON ON ON
NEC 8023/C, Itoh 8510/DMP 85 OFF ON ON OFF
Centronics 739-1 OFF ON OFF ON
Anadex Printers OFF ON OFF OFF
Okidata 82A, 83A, 92, 93, 84 OFF OFF ON ON
Okidata 84 w/o Step II Graphics OFF OFF OFF
ON
Apple Dot Matrix OFF OFF ON OFF
IDS Printers (Any position)
Notes: DIP switch ON = "+" side or
set to right.
Switch 1 controls MSB, the 8th bit. Setting
switch 1 to 'ON'
makes MSB _not_ transmitted...
Photo
Click for English Info here: Apple
II Csa2 FAQs: Printers
Grappler
+ - Apple Drucker Interface
Card für Apple II IIe and IIgs
Grappler+ Drucker interface Karte von OrangeMicro
für den Apple II, IIe, und IIgs - ungetestet,
keine Garantie (sieht jedoch ungenutzt aus, keine
Kratzer). Um einen Drucker an ihrem Apple anzuschließen
brauchen Sie nur das weit verbreitete "Centronics"
Kabel, es ist auch heute noch bei eBay zu bekommen.
Wer es sich aber selber basteln möchte, hier
die Pinbelegung:
Grappler+ Pin Assignments
~~~~~~~~~~~~~~~~~~~~~~~~~
STB 1
D0 3
D1 5
D2 7
D3 9
D4 11
D5 13
D6 15
D7 17
ACK 19
BUSY 21
P.E. 23
SLCT 25
N/C -
GND all others
Hier die DIP Belegungen für die einzelnen
Drucker. Man muß die Karte darufhin per
Dipschalter konfigurieren.
~~~~~~~~~~~~~~~~~~~
DIP SWITCH POSITIONS 1 2 3 4
Epson Series and Star Gemini OFF ON ON ON
NEC 8023/C, Itoh 8510/DMP 85 OFF ON ON OFF
Centronics 739-1 OFF ON OFF ON
Anadex Printers OFF ON OFF OFF
Okidata 82A, 83A, 92, 93, 84 OFF OFF ON ON
Okidata 84 w/o Step II Graphics OFF OFF OFF
ON
Apple Dot Matrix OFF OFF ON OFF
IDS Printers (Any position)
Bemerkung: DIP switch ON = "+" Seite
oder "nach rechts"
Switch 1 kontrolliert MSB, den 8ten bit. Einstellung
switch 1 auf 'ON'
erzeugt: MSB _not_ transmitted...
Info von Apple
II Csa2 FAQs: Printers
Photo
Grappler+ Printer Interface Card - DIPs are on
the right (blue)
Grappler+ Drucker Interface Card - Die DIPs sind
rechts (blau)
|
